Packing machine A machine that can complete two or more packing processes on a single machine. It is composed of a frame, a turret, a transmission component, a bag store, a bag-opening component, a blanking component, an auxiliary material supply device, a bag-tapping device, a heat sealing component, a sealing cooling device, a conveying device, a gas supply control and a water supply control part, and electrical equipment. The vertical shaft turret with a stepping type rotation is located in the middle of the frame, the turret is equipped with a clamp opening and closing device, and a transmission component is installed below the turret. The motor in the transmission part is connected with the I shaft equipped with a CAM and a bevel gear through the reducer and gear, the CAM on the I shaft is connected with the solid shaft of the turret through the indexing mechanism, and the I shaft is connected with the II shaft equipped with a CAM and a bevel gear through a pair of bevel gears, and the CAM on the II shaft is connected with the hollow shaft of the turret through the connecting rod. The hollow shaft is connected with the clamp opening and closing device through the control component, and the II shaft is also connected with the III shaft through a pair of bevel gears; It can package complex materials and complete the addition of auxiliary materials to meet the high requirements of packaging.
The packing machine is suitable for the composite bag with plastic or aluminum foil film as packing material. It has the advantages of beautiful appearance, compact structure, high efficiency and easy operation. The automation level of the automatic vacuum packaging machine is constantly improving, and the application scope is constantly expanding. The automatic control of the packaging system has greatly improved the production efficiency and product quality, effectively reduced the labor intensity of the staff and reduced the consumption of energy and resources. It plays a very obvious role in improving the packaging quality and improving the appearance of products.
The service life of the packaging machine is not only related to the machine design and accessories, but also related to the use method. If used properly, it can extend the service life. Routine maintenance of packaging machine to clean, smooth, reflection and fastening, in the machine task and task should be stopped according to the requirements of routine maintenance. Primary maintenance: it is stopped on the basis of routine maintenance. The important task is to smooth, tighten and reflect on the relevant parts and their cleaning tasks. Secondary maintenance: to reflect on, adjust the heavy. In detail to reflect on the starter, clutch, transmission, transmission components, steering and braking components. Three level maintenance: It is more important to detect, adjust, remove hidden trouble and balance the wear level of each component. Stop the diagnostic testing and state reflection on the parts that affect the performance of the equipment and the parts that show signs of failure, and then complete the necessary replacement, adjustment and troubleshooting tasks.
